Jello Shot Recipes

Jello Shot season is now among us!

Jello shots are probably one of the easiest type of shot to make, and a a lot more tastier than most. There are a lot of different flavors, but here's a few good ones nonetheless:

**Watermelon Shot**

1 package watermelon Jello

1 cup boiling water

1 cup Malibu® coconut rum

Mix hot water and jello. Add rum. Pour into 2 ounce cups. Serve after the jello has set. Serve in a Shot Glass

**Strawberry banana Shot**
1 pack of strawberry jello

1 cup boiling water

then add 1 cup banana liqueur

**Bermuda Triangle**

1/2 cup boiling Cream Soda

1 box Cranberry gelatin

1/2 cup Vanilla Rum

1/2 cup Orange Juice

**Paradise Punch** Simply Divine!

1/2 cup boiling cranberry juice

1/2 cup pineapple juice

1/2 cup orange juice

1 box Cranberry Gelatin

1 box Orange Gelatin

1 cup coconut rum

1 cup pineapple rum

I like is make up shots and put them into plastic shot glasses with lids so I can take them with me. If you don't know where to buy 2 oz. Plastic Jello Shot Cups with Lids you can order them online.

For more ideas on recipes you might want to check out this great Jello Shot Recipe Book .

Have a Great Summer!

Until Next Time!

Jasmine :)

PREPARING YOUR BEER KEG ~ A MUST!

Have you ever bought a Keg of your favorite beer for a party only to be disppointed in the taste? You probably thought you bought bad beer. Well maybe not. Did you know that you should never open a keg as soon as you purchase it?

Here are some tips you might want to follow:

The keg should ALWAYS be kept cold. Keep your keg refrigerated or ice down at least 3/4 of the way up the keg. If not you’ll have warm and foamy beer. Keep the keg and tap out of direct sunlight.

The keg must settle for an hour or two after you ice it down. Do not tap the keg until after it has settled. If you tap it right after getting it home you may get excessive foam.

After the keg has settled, go ahead and tap it. Line up the two notches on the keg with the two indentations on the bottom of the tap. Rotate the tap one-quarter turn clockwise to tap it. Then, depending upon what style of tap you have, pull the lever handle out and push down to locked position. If you have a wing style tap, just turn the wing handle clockwise a quarter of a turn.

DO NOT PUMP THE TAP RIGHT AWAY! There is plenty of carbonation in the keg to get it started. Open the faucet to start the flow of beer. Only pump the tap when the beer flow begins to slow down. Don’t over pump. This will cause foam.

Open the faucet quickly and all the way. You may find at first the flow to be faster than desired; this is normal due to the CO2 pressure in the keg.

Keep in mind that you are pumping oxygen into the keg. Oxygen is bad for beer and will cause it to go flat in a day or so. If you have some beer left over and want to use it the next day, take the tap off the keg and keep the keg iced down. It may lose some of its freshness the next day but still may be ok to drink.

I found a gag shirt online I thought you might think is kind of funny...wear it to your next Party so you can control the keg (maybe!)

Click Here to Check Out This Shirt!

Until Next Time!

Jasmine

Resources: http://barworks.blogspot.com www.foxsatellite.com

Great Outdoor Beer - Beverage Dispenser

Sorry I don't have a lot of time to write a regular blog as I am on vacation (Myrtle Beach), but I found a great product I thought you might like!

Why not let your guests be their own bartender and join the party yourself!

This cool BEVERAGE DISPENSER
keeps 80 oz. of your favorite drinks or beer cold at your bar, pool,or outdoor patio.

It has a built in light to illuminate the contents of the container! This creates a fantastic effect, and your guests will find their way to their favorite drinks, even on a dark patio!

CLICK HERE TO CHECK OUT THIS HANDY BEVERAGE DISPENSER

Always remember that you only live once so you you better make the most of it!

Until Next Time!

Jasmine :)

Resources:
www.foxsatellite.com, http://barworks.blogspot.com

Choosing a Pub Table For Your Home Bar

How To Choose The Pub Table That Is Right For You


Have you just put up the home bar of your dreams and now need a pub table so you can sit down and have a drink with friends on basketball finals night? Have you just moved to your own place and want to use a space-saving pub table as your dining table? Do you prefer to eat your meals sitting high to see out the window for a better view?

Pub tables have become necessary accessories in homes with the coming of home entertainment systems and home bars. Nowadays, you can easily shop online for pub tables in different sizes, diameters, materials, finishes and style. But how do you choose the pub table that is right for you?

Tips on choosing the right pub table:

1. How tall do you want your pub table to be? - If you want it to be the same height as your kitchen countertop, then you should get a pub table that is about 36 inches tall and a bar stool that is 24 inches.- If you want it to be the same height as your bar countertop, then you should get a pub table that is about 42 inches tall and a bar stool that is 30 inches.- If you want to have the flexibility of varying the height of your pub table and bar stool, then you should get a metal table and bar stool with adjustable height mechanism.

2. How many people are you going to seat around your pub table?- If you are going to seat 2-4 people, then you should get a table top measuring 24 inches in diameter for cozy get togethers or 30 inches if you want to comfortably fit 4.- If you are going to seat more than 4 people, and this is usually outdoors where you will have more room, then you should get a table top measuring 42 inches in diameter. Outdoor pub tables of this size can come with holes to hold an outdoor patio umbrella.

3. What would be the best location for your pub table?- If your home bar is indoors or if you want to use your pub table as a dining table, then you should put your pub table indoors in the recreation room or den.- If you often entertain outdoors, or you simply enjoy being around in your garden or covered patio, then you should put your pub table outdoors.

4. What material, style and finish do you want for your pub table to suit your taste and home décor?- If you prefer the traditional old-world style, then you may opt for bevelled, hardwood pub tables in oak finish or the graceful flowing lines of handcrafted metal or wrought iron pub tables with clear glass table tops.- If you prefer the modern contemporary look, then you may opt for black metal pub tables with clean, minimalist lines and a clear bevelled glass table tops.- If you want to create the tone for viewing an exciting ballgame, then you may opt for a pub table in the themed style which shows your favorite college team logo.

5. Do you want bar stools to accompany your pub table?- What type of back do you prefer for your bar stools: high back, low back or backless?- Do you prefer the seats upholstered in fabric or leather?- Do you want the seat to swivel or remain stationary?- Do you want the seat to be 24 or 30 inches high? - How many bar stools would you need?

6. And last but not least what is your budget? Remember to always stay within your budget. If you would like to check out some great bar furniture for your home please click on the banner below:

Please click banner!


Click here for another great discounted furniture site!

Another great online resouce I found sells neon signs for your favorite Sport Teams (GO RED SOX!!!). These signs would be cool on the wall behind your bar. If you would like to check it out, simply click on the banner below:

Please click banner!

Well that's it for now.....

Until Next Time!

Jasmine :)


Article Source: http://www.articledashboard.com
Flor Buenaventura is a writer who has a great interest in furnishings for the home and garden. To see a fantastic collection of resources related to pub tables, please visit her great Pub Tables website.

Home Beer Keg Refrigerator ~ Kegerator

Why Have a Kegerator (Keg Refrigerator)?

Like a lot of of people, it is probably a dream of yours to have cold beer flowing in your own house. But aside from the obvious reason – that it’s just plain cool – there are practical reasons for installing a kegerator.

Save Money:
Depending on the type of beer you drink you will find that you will save anywhere from 50% - 70% serving keg beer versus buying bottles and cans.

Save Time:
Reduce trips to the store! No more running out to restock the fridge every time you have a few friends over for the game.

Take it Easy:
Stop stressing! With a kegerator at your next party, you won't need to worry about how to pack a few cases of beer in your fridge.

There are no empty bottles and cans to deal with. And our favorite reason for getting a kegerator: Keeping the peace! Your spouse will always know where you are hanging out drinking! Buy a Keg Refrigerator or Convert an Old Fridge into a Kegerator? Depending on your kegerator usage and your budget you have a few options for having beer on tap:
Buy a Keg Refrigerator. This is an all-in-one refrigerator and draft system.

Get a Keg Refrigerator Conversion Kit. A conversion kit allows you to transform an old fridge into a Kegerator.

Why Buy a Keg Refrigerator?
You don't need to worry about finding a fridge that works and that is not being used for another purpose.

A new Keg Refrigerator will usually look better than revamping an old fridge; and if you are building a new bar you may want to maintain a particular look and feel.

If bought new, Keg Refrigerators typically come with a manufacturer’s warranty. Warranties differ by manufacturer, but the standard is one year for parts and labor and five years on the compressor.

Why Convert an Old Fridge?
It is considerably cheaper. You can convert an old refrigerator for around $150-$250. Better refrigeration conversion kegerator kits are a little more expensive, but well worth the investment.

Your old refrigerator most likely has a freezer, where you can chill your glasses. There is nothing like pouring a cold beer into a frosted glass!

You can store bottled or canned beer, wine coolers and malted beverages in the door. One word of caution: Many people think they can use a Tower Conversion Kit to convert a small college dorm room refrigerator, but most times this is not possible. You need to make sure that the fridge is large enough to comfortably fit a keg. There should be enough room so that the keg does not come in contact with the freezer usually found at the top of these units.

If you choose a tower conversion kit, one solution is to buy a cube freezer and use a Freezer Temperature Controller
to keep the temperature from falling below freezing. This device is easy to install. Just plug it into the wall, and then plug your freezer into it. Put the sensor in the freezer and close the door.

Choosing a Kegerator Kit

If you have decided to convert an existing refrigerator into a kegerator the first thing you need to do is make sure that it is large enough to hold a keg.

Click here to Convert your old refrigerator into a kegerator!

Building Your Kegerator

Instructions will vary depending on the type of kegerator conversion kit you purchased. Most kits will come with instructions.

Here, are some pointers to think about:
The most important decision you will need to make is where to put the faucet. Some people choose the side, other prefer the back. It is your personal preference.

You need to be sure that when you drill you do not hit one of the cooling coils. This is particularly true if you are drilling inside. To be safe, drill through just the outside layer and stop. Then, look inside to make sure you will not hit anything before going on. This could be a costly mistake!

If you choose to drill through the door make sure the tap is low enough so you can open the freezer without any interference from the freezer door.

Maintaining Your Kegerator

Luckily, your kegerator and draft beer system will require very little maintenance. Keeping it clean should be your main concern. You should keep it clean both inside and out with normal cleaning agents, at your discretion. We suggest that you clean your beer lines every time you change your keg. Using a Cleaning kit is the easiest way to do this. It only takes a few minutes, and will assure your beer tastes fresh and crisp. This will also help to avoid sediment build up in the beer lines that can cause foam.

CLICK HERE FOR KEGERATORS

CLICK HERE FOR REFRIGERATOR CONVERSION KITS

Until Next Time!

Jasmine :)

www.foxsatellite.com

Building Your Home Bar

You’ve been thinking about it. You’ve been dreaming about it. Now, you're finally going to do it. You’re ready to build your own home bar!

Did you just buy a house or landed a sweet new pad with the perfect space that is just screaming "BAR!!!"? Or maybe, you have been thinking about building one for years. Either way – it’s time! Your home bar will be a source of enjoyment for you, your family and friends for years to come.

A home bar is an investment -- one of the best ones you will ever make, but an investment nonetheless. So make sure you do it right!

We are home bar owners and urge you to learn from what we’ve done right and what we’ve royally messed up. Let our experience help you build the best bar possible! To get started, ask yourself the following questions before you build.

The Basics

Do you want your bar to be moveable or permanent?

Who is going to build your home bar? You? Enlisting a few drinking buddies to help? Or, are you hanging up your hammer and hiring a contractor or carpenter?


Look and Feel

Is there a theme to your home bar? Just think of the possibilities:

Irish/English Pub
Game Room
Sports Bar
Tiki Cantina
Or are just trying to relive your good old college days?

You’ve got tons of choices and the decisions are all yours; so make sure you spend a few minutes and decide what you want.
Having trouble deciding? Ask yourself:

How much time are you going to spend in your bar room?

Is your bar in a room by itself? Do you use the room for things other than entertaining?

Do you want the bar to be the focal point of the room?

Exploring Your Options

There are tons of options when building a home bar. Here are the most common:
Will you be putting in a full back bar or simply wall shelving behind the bar?

Will this be a wet bar (sink) or dry bar (no sink)? If you want a wet bar you'll obviously need to run water lines and a drain system. These lines may already exist in your basement. For this type of work you may want to enlist the help of a plumber or a buddy who has experience building his own bar.

Do you want beer on tap? If so, you’ll need to install a Draft Beer System. When planning this system, think about how many faucets you want to install; most home bars have one or two. Keep in mind that running beer lines long distances is very expensive. Commercial bars spend thousands of dollars to run beer lines from their basements to their main serving floors. We highly recommend that you keep your refrigeration and serving areas close to each other, to avoid these costs.

Will you need an exhaust system? If you've got smokers in the crowd then this is a must!

What type of Refrigeration will you need? You may want a refrigerator for soda, mixers and bottled beers or possibly a separate wine refrigerator.

Will you be putting in an Ice Maker?

How much storage do you want? Glassware, liquor bottles, cocktail recipe books, bar tools and blenders all take up space.

Bathroom – we highly recommend it! You know the deal! So, if you have the space, consider adding a half bath nearby. When you have the guys over for the big game or office gathering, a nearby restroom cuts down on extra house traffic.


Draft Beer and Wine Refrigeration

Refrigeration is one of the most important components of your home bar. There are many types of bar refrigeration: Wine Refrigerators, Draft Beer Refrigerators, Kegerators, Beverage Centers, and Ice Makers.

The type of refrigeration you decide to incorporate into your bar will be based on how much room you have, the amount of money you plan to spend and what you like to drink.

As a simple solution you may use a single piece of refrigeration like a back bar refrigerator to store beer, wine, and soda. More complex bars include building your refrigeration units into the counter or under the bar. If you choose to go this route you need to make sure the compressor vents are in the front of your unit, or that the unit is labeled as being able to be built-in. If you don’t do this the hot air given off by the compressor has nowhere to vent to and ends up burning out the compressor motor.

One major piece of advice: get all the refrigeration, sinks and larger items that need to be installed BEFORE you begin building the bar!

Wine Refrigerators

There are many different styles and sizes of wine refrigerators or wine chillers. The size you need can be determined by how many bottles of wine you are looking to chill as well as what types of wines you drink most often. Smaller wine chillers hold around 16 bottles; larger wine refrigerators can hold over 100 bottles! Many of the models available are small enough to fit on your back bar or counter top.

Beer Refrigerators and Draft Beer Systems

Installing your own draft beer system or Kegerator is not as hard as you think! Remember, it’s much easier to add a draft beer system upfront rather than try to add one after you’ve built your home bar.

There are several ways you can pour draft beer at your home bar without breaking the bank. First, note that draft (keg) beer must be kept cold at all times. If it’s not kept cold, the beer gets foamy and then you have to waste precious beer pouring off the foam. For this reason, you want to keep your beer and beer lines close to your source of refrigeration. Not only will this help reduce wasted beer, it will also save money in set-up costs.

A very popular option is a single keg fridge that is designed to be built into a bar or cabinet system. These typically have the beer tower (faucets) sitting on your bar top with the fridge located directly underneath. Under the counter keg refrigerators are easy to install and can also be used as stand alone units if the need arises. Most people build these units into their back bars, but they can be placed on the front bar as well.

Another option is use a stand-alone Draft Beer Refrigerator and set it to the side of the bar. Unless you’re looking to use a commercial grade unit, you can usually save a few hundred dollars by using a stand-alone keg refrigerator.

Want to use an old refrigerator you already have? This is also an option. Taking an old refrigerator, like the kind you have in your kitchen, and converting it into a kegerator is simple. You can position the fridge so it’s out of the way or decorate it and make it the focal point of the bar. Whichever way you choose to display it, you’ll want to make sure you have a Drip Tray to catch the excess foam so it doesn't spill onto your floor.

Beverage Centers

If you are planning on serving canned or bottled beer, wine, malt beverages, soda and/or juice you will probably want to consider a Beverage Center. Beverage Centers come in various sizes and can generally be built into the cabinet system of your back bar. Most of these units come with a glass door so you can display what you have available for your guests.

Ice Machines

This is one item that most people never really think about. Running up the stairs constantly to fill the ice bucket is no fun. They now make small, portable, under-the-counter ice makers. Some don't even require a drain line. If you buy a lot of bagged ice, one of these machines will easily pay for itself.


Bar Arm Rests and Bar Foot Rails

The final touches for your basement or recreation room bar will be Bar Arm Rests and foot rails. Your bar might look okay without foot rails, but handrails or arm rests are a must if you care about the comfort of your guests and how your bar looks! There are two different styles of arm rests: metal arm rests and wood arm rests.

Wood Arm Rests
You can use sculpted arm rests to easily add comfort to your bar. They are available in many types of wood and are usually sold unstained.

First, stain or paint the arm rests to match your bar. Allow time to dry completely.

Next comes installation – a fairly simple process.
It is most common to glue the lip of the arm rest to the front corner of the bar and use finishing nails to secure it. Then, you can brace the underside of the arm rest with a 1" x 4" (or appropriate sized) piece of wood, depending on how far the top of the bar overhangs the front. We suggest that you use your best judgment when assembling your arm rests. Other methods of installation might work better depending on the exact specs of your bar. .

Metal Arm Rests
Some people prefer metal arm rests which are available in several finishes because they better capture the “feel” of their bar. There are 3 components to the metal arm rest system: the rail, the bracket, and the end caps. First, the rail extends the length of the bar and gives people something to lean on. The brackets are used to connect the rails to the bar and hold the rail up. The brackets should be installed at least ever 4’ to make sure the rails don’t bed. To make sure your bar looks polished, the end caps go on both ends of the rail to complete the picture of you as swanky bar owner. .

Once you have decided on your arm rests you should definitely consider foot rails. We highly recommend them both for looks and comfort. Most bars and pubs have them because they “get it”. Standing with one foot resting on something while leaning against a bar or having a place for your guests to rest their feet while sitting is always a plus – it’s just more comfortable!

Both arm rests and foot rests are difficult to make on your own. So, we suggest that you buy the bar foot rails and arm rests then install them yourself. Installing these on your own is very simple and can usually be done by yourself or with just one of your buddies..

Metal Foot Rails
Foot rails are an amazing add-on to your bar. They add a touch of class that will truly set your bar apart from other home bars. Foot rails, or bar rails as some call them, are available in many different styles and finishes. The most popular are brass foot rails, but for outdoor use we recommend stainless steel foot rails for added durability. Just like the metal arm rests, there are three components of the foot rail system: the railing, the bracket and the end caps.

Depending on the size and layout of your bar, you may want to use one of the 90 or 135 degree bends. These bends are used to wrap the rails around the corners of your bar. We recommend that you space the Foot Rail Brackets 4' apart, and six inches from any bends for proper support.

Bar Stools and Seating
Once you have your home bar constructed, you’ll need a place for people to sit. There are many varieties and sizes of Bar Stools, and they range in cost from very reasonable to quite expensive. You will first need to determine if you want Wood Bar Stools or Metal Barstools. If your bar is the standard 42" you will most likely want 30" Bar Stools.

Wood Bar Stools

Wood Bar Stools will give you a traditional pub feel. They are generally a little more expensive, but they are durable and you can customize them by choosing your wood, stain and even the pattern for the cushion.

Metal Bar Stools
If your home bar has more of a contemporary feel, you may want to use Metal Bar Stools that have a sleeker look to complement your bar. As with the wood bar stools, there are many different styles and sizes available.

Standard Metal Pub Stools
These are the Bar Stools that you have seen everywhere, and for good reason. They are reasonably priced and extremely durable. Metal bar stools offer a lot of variety: backless, stools with half backs, stools with full backs, etc. and a variety of colors. Probably the most common style is the black bar stool with no back that you’ve seen hundreds of times. With these types of stools, it’s usually easy to find what you’re looking for and to get the stools quickly.

Layout and Design of Your Home Bar

Laying out the design of your home bar is where it all starts to come together. Going through this planning process will help you know what size bar your space can accommodate, what type of bar furniture and beer refrigeration you will need, as well as how long this project may take.

We suggest that you visit your favorite taverns and/or restaurants and take a close (sober!) note of what you like in a bar. Think about what elements and styles you like: Do you like a big glass mirror behind the bar? What types of stools and bar rails are your style? Take special note of the bar’s structure - how was it made, what's it made out of? Bring along a digital camera – pictures always help!

Before you sketch – consider these important factors:

When you are ready to lay out your home bar – the first thing you must consider is space.

With this in mind, think about the following:

Will the bar be just one straight side? L-shaped? Horseshoe? Rectangular?

If you're working off of a concrete floor, outline your layout in chalk. If the floor is already finished, use coins, paper or string to outline where things will go.

Once you have your initial layout complete, transfer it to paper. Be sure to use precise measurements.

Remember, your bar is going to be three-dimensional. So, the outlines on the floor won’t visually take up as much space as your finished bar, because you’re going to add a height component.

The average home bar is 42" high and 24" deep. You can adjust these measurements to fit your own needs. Just remember that most bar stools are 30" tall so your bar should not be much lower than 42" high.

What are you going to keep behind the bar? Are you going to have a sink and where will it go? If so you will need to have plumbing and drainage.

Sinks are usually placed under the front bar, but putting them in the back bar is not unheard of. They come in all shapes and sizes from a simple, shallow one-bowl hand sink to a standard bar sink (with legs and up to three bowls and a drain board). These are usually made of stainless steel and can be built-in. Click here to see my recommended sink styles.

Take into account where your existing plumbing is located. This can help determine where to build your home bar.

Ask yourself: What restrictions and obstacles are there? Low ceiling height? Sump pump? Where are the electricity and cable TV outlets?

Are you going to have refrigeration for beer and cocktail mixers? You will need to figure out where they will go and make sure you have an electrical outlet near by.

Glassware is another thing to consider, will you be putting in an overhead stemware rack, stacking it on back bar shelving or putting it in drawers?

Will you be adding a big screen TV or entertainment center? Positioning these correctly is key.

Also think about outlets for a TV, additional lighting, popcorn maker, blender, etc.

Building Yourself Vs. Hiring Out

When putting in a home bar, you have three options: purchase and install a Ready-To-Assemble (RTA) home bar, build a custom bar yourself, or hire a contractor to do the custom job for you. There are many factors that come into play in this decision making process. The route you take will depend on the amount of free time you have, the amount money you have to spend, how handy you are, your time frame, etc. Below are some things to consider when you weigh your options.

Hiring a Contractor:
For big projects we suggest hiring a general contractor. A home bar has many facets and will require several different trades. A contractor will handle all the plumbing, electrical, carpentry, permits (if needed) and cleanup. The contractor will work with you on design and can alert you to any potential problems and/or concerns. These guys are worth their weight in gold! Most likely they will get the job done quickly, with few headaches on your end. It’s a much safer bet than relying your buddy’s uncle who used to do some electrical work ‘back in the day’.

Before you start:

Get a few estimates. They are typically free and you will have greater bargaining power on price in the end if you do.

Have your wish list ready in writing, so that neither you, nor the contractor overlooks anything. Take the advice from above, sketch out your ideas and plans, and have this ready as well.

Once you receive your estimates read them over carefully! A good estimate will include a contract, price breakout, total cost, and payment terms. Make sure EVERY element you want is included in the estimate before you select your contractor.

Once you select a contractor, make sure you discuss a timeline for completion (and hold them to this date!). Have the contractor include this date in the contract, along with a penalty clause if they don't meet it. Most reputable contractors will do this. Beware of the guy who has six jobs going at once! You want your contractor to show up everyday and get the job done.

Before your contractor starts the job, we highly recommend that you get all the refrigeration, sinks and larger items that you need for your bar BEFORE the contractor starts! Don’t let the contractor guess on sizing – have all items at your house. This will eliminate any nasty surprises like things not fitting, doors not having enough room to open and other ugly spacing issues.

Building the Bar Yourself:
Hey, if you are up for the challenge, we say - do it! If you are fairly handy, or have some fairly handy friends that will work for beer, it can be a good time and a great hobby. Building your own home bar can be fun and give you a sense of pride in your creation!

Before you start:

Get everything you need before you start! This helps you plan, measure and build.

Don't buy the cheapest stuff you can find. Staying within your budget is important, but quality is important too! You don't want to be constantly replacing things – it’s a pain!

Get extra materials! Unless, you or one of your friends is a carpenter you will most likely make a few mistakes and having extra pieces and parts saves headaches!

If you are having friends help, have them over and let them check out your drawings. Hang them up! Let everyone see what you envision! Get everyone on the same page.

Usually 1 or 2 helpers are plenty at a given time. The more people you have helping you at once, the faster it turns into a Joe telling Jeff about his hot new secretary – there will be plenty of time for that AFTER the bar is built!.

If you have a workstation outside of your bar area, keep in mind that you need to be able get every piece of the bar from your shop to the bar room.

Don't crack a beer until after you are done working for the day, especially if you are using power tools.

Arm Rests and Bar Foot Rails give that finished look to any bar! Professional looking Arm Rests and Foot Rails are hard to recreate. We suggest buying these and installing them yourself. Below are several great online sources you might want to check out:

Click here to choose the perfect foot rail for your home bar.

Click here to choose the perfect Arm Rest for your home bar

Stocking Your Bar

When your Home Bar is finally finished you will need to stock it so you can pour drinks and entertain! Getting your Bar Supplies and Bar Accessories is often the most fun part of building your bar. You can get anything you have ever dreamed of or have seen at a bar. Click here for some great Bar Accessories

Everything you need breaks down into three basic groups: alcohol, mixers and bar accessories. What you finally decide to have behind the bar will depend on what drinks you serve the most of, but below are basics:

Alcohol
The brand names and types of alcohol that you use to stock your bar depend on your favorite brand and what type of drinks you like. To get started, here’s a list of the basics that any bar will need:

Rum
Vodka
Gin
Whiskey
Bourbon
Tequila
Schnapps
Triple Sec
Scotch
Wine

Depending on your personal preference there are many other types of liquor that you may choose to have. So be creative!

Mixers
Everyone loves a good mixed drink! Below are some of the basics you will need to keep everyone happy:

Cola
Orange juice
7-Up ir Sprite
Tonic water
Soda Water
Iced Tea
Cranberry juice
Pineapple juice
Grenadine


Bar Accessories
These are some of the basics you will need to mix and serve your drinks. You’ll probably find other tools that you like, and some of the ones on the list you won't use. That’s what makes having your own bar fun; it reflects you and your personal tastes. Here’s what we suggest to start:

Shot Glasses
Cocktail Shaker
Bar Caddy
Bottle Openers
Bar Mats
Blenders
Bottle Pourers
Straws and Stirrers
Margarita Glass Rimmer
Glassware: Beer Mugs, Wine Glasses, Rocks Glasses
Ultimate Home Bar Set – this gives you everything you need to start!

Click here for more information on liquor dispensers.

To learn more about glass racks click here.

I hope this guide you has given you a better understanding of what goes into building your home bar, shown you some short cuts and aided to the overall design and look of your home bar. Have fun with it!

Until Next Time!

Jasmine :)

P.S. I found a great Satellite TV company you might want to check out!

Click here for information on installing Satellite TV in your Bar.

www.foxsatellite.com